FILTER PRODUCTS
FR230 Intucompound Fire Mortar
Nullifire
FR230 Intucompound is a gypsum based mortar used to reinstate the fire resistance performance of floor & wall constructions where they have been breached with apertures for the penetration of single or multiple services. FR230 provides a safe working platform for loads up to 2.5 kN/m? when installed in full accordance to our recommendations.
FR230 is used to stop the spread of fire and smoke around services that pass through compartment walls and floors, whilst providing a load bearing capability (refer to application instructions). The system also provides thermal, acoustic and air sealing performance.
FR230 is suitable for the following service penetrations: single and bunched cables, cable trays/ladders/ baskets, non-combustible pipes. Also suitable for cable trunking, combustible pipes, insulated non-combustible pipes, in conjunction with a suitable Nullifire closer device (for example FP302 Intustrap).
May also be used around dampers & ventilation ducts (consult manufacturer).
Typical areas of use include health and leisure facilities, schools, universities, hotels, commercial, retail and industrial buildings.
Show More..
- Up to 4 hours fire resistance - Tested to EN 1366-3 & 4 1.21 m? without framework requirement
- Load and impact capability after 50 hours only
- Flows easily around and behind services
- Rapid setting, zero shrinkage formulation
- Can be used as pourable or trowel grade
- Acoustic and thermal performance
Show More..