FILTER PRODUCTS
PermaBase offers a competitive advantage over similar products on the market with its patented EdgeTech® technology. The tapered, reinforced edge design allows for closer nail or screw application to the edge.
Double-wrapped edge with EdgeTech technology allows for closer fastener application of nails or screws at the edge without crumbling or spin out. IRC and IBC 2006 Compliant – Meets ASTM C 1325. PermaBase resists the growth of mold and mildew achieving a panel score of 10, the highest score possible, per ASTM D 3273. Homogeneous core has fewer voids and provides a very easy and clean score and snap.
Can be cut utilizing a standard utility knife and straightedge. With PermaBase’s unique core composition, little or no additional labor is needed to clean the edge after a cut.
- Non-Combustible -A1 rating- 1 and 2-hour fire rating depending on wall build-up.
- Moisture resistant - will not be affected by water or moisture.
- Mould resistant - will not promote mould growth.
- Dimensionally stable - will not expand/contract.
- Increases Acoustic values.
- Impact resistant.
- Excellent tile backer board - can be tiled onto without primer.
- Can be used as a render receiver board - basecoat/acrylic or sand and cement finishes / thin brick.
- Available in 6mm and 12mm.
- Easy to cut.
- Thickness - Nominal:1/2" (12.7 mm).
- Weight - Nominal:2.9 lbs./sq. ft. (14.2 k/m2).
- Flexural Strength:≥ 750 psi.
- Compressive Strength :1,250 psi.
- Wind Load (Studs 16" o.c.):40 psf.
- Water Absorption (% of Weight):< 8%.
- Linear Expansion with Change Moisture:≤ 0.07%.